
Blaster Description: The Elektro Lumens 'Blaster VI' is a newly developed, aluminum flashlight.High grade 1/8" thick aluminum alloy is used in it's construction. The parts are machined using precision CNC Lathes. High quality, tough, grade 3 anodizing, inside and out. The LED is the 5 watt Luxeon Star, manufactured by Lumileds, who make the brightest LED's in the world. The Blaster VI also uses newly developed collimating optics, which produce a very tightly focused beam of light, which is about 10 degrees. This collimator is not the small one from Lumileds, but is 30mm in diameter (35mm at the outside of the rim). It does a better job of capture more emitter light, and focuses it into a much brighter and tighter beam. I have designed it to be water resistant, using o-rings in the head, for the lens, and for the tail cap, and the switch has a rubber seal, similar to other 'D' cell aluminum flashlights. The texture of the finish has a very fine “grooviness. GROOVY
![]()
I have had several responses that it had a 'tactile' look and feel. What do you think?
- Blaster VI - (6 AA cells, 5 watt Luxeon Star)- The Blaster VI is a 2 'D' cell size flashlight. This flashlight has two differnt battery holders: 1) CR123 holder/sleeve.
This allows for use of CR123 batteries. 2) A battery holder I call '3-To-D'.
This battery holder is the same size as a 'D' cell battery, but holds 3 AA batteries. Two of these in the flashlight will produce 9 volts. This flashlight will ship with the 3-To-D battery holders. The CR123 battery holder can be purchased as an extra . This flashlight is just as bright as the Blaster V, but much smaller. Battery life is about 2 to 3 hours on 6AA batteries.
======================================================================================
| Pay me securely with any major credit card through PayPal! |
![]() |